Pole Barn & Garage Insulation in Erie, PA

Pole barn and garage insulation solves two problems at once in Erie County: heat loss and condensation. Steel roofs and walls get very cold in winter. When warm, moist air from a heater, a vehicle or livestock meets that cold steel, water condenses and drips onto equipment, floors and stored feed. Closed-cell spray foam applied directly to the steel insulates and stops the drip, because warm air can no longer reach the cold metal.

Why closed-cell foam on steel

Closed-cell foam bonds to steel, purlins and girts, fills the ribs of the panels and seals the seams. At normal thickness it is a vapor retarder and does not absorb water. HomeGuide lists it at R-5 to R-7 per inch. Fiberglass blankets behind steel can work in new buildings but often trap moisture and sag over time, and they are hard to add to an existing building.

Shops and heated garages

If you want a workshop you can heat in January, or a garage that never freezes, foam on the walls and roof deck makes heating practical. Attached garages also need attention to the wall and ceiling shared with the house, where fire separation rules apply. Exposed foam inside a building generally needs a thermal barrier or a product rated for exposure; we explain what your space needs.

Farm buildings

Southern Erie County has a lot of farmland, with barns and pole buildings on many properties in townships like McKean and Summit. Equipment storage, livestock buildings and farm shops each need a different approach to ventilation and moisture. We look at how you use the building before suggesting thickness and coverage.

Planning the work

Foam has to go on within a working temperature range, so unheated buildings are easiest to spray from late spring to fall. We measure the walls, roof and any doors or openings, and quote by the square foot of surface sprayed, with the foam thickness written down.